|
EN Standard Bicycle Front Fork Backward Impact Tester AC220V 15A
| MOQ: | 1 Unit |
| Price: | negotiated |
| Standard Packaging: | plywood case |
| Payment Method: | L/C, D/P, T/T, Western Union, MoneyGram |
| Supply Capacity: | 10 unit / month |
AC220V 15A Impact Tester
,Bicycle Front Fork Impact Tester
,EN Standard Impact Tester
EN Standard Bicycle Front Fork Backward Impact Tester
Test principles
A roller with a mass less than or equal to 1kg is mounted on the fork. The impact surface hardness of the roller is not less than 60HRC.
A weight with a mass of 22.5kg ± 0.1kg is placed on the roller of the fork leg, which is equivalent to applying a force in the plane of the wheel to the direction of travel of the fork. A deflection measuring device is installed under the roller to record the position of the roller in the plane of the wheel, perpendicular to the direction of the fork riser axis and the vertical position of the fork.
The deflection measuring device is removed and the weight is raised above the lightweight roller. It is then released so that it impacts on the roller in the direction of the front deflection. The weight drop height can be referred to the following table. The weight will bounce, which is normal. When the weight stops on the roller, measure the permanent deformation under the roller.
Note: Refer to ISO 4210-3:2014
| Type of bicycle | City Bikes | Children's bikes | Mountain Bikes | Racing | |
|
Drop height |
All-steel front fork | 180 | 180 | 360 | 360 |
| Fork with composite material | 320 | 320 | 600 | 640 | |
Technical Parameters
| Impact Height | MAX1500mm |
| Height scale | Adjustable according to the height of the mold and specimen combination |
| Impact mass | 15kg, 22.5kg |
| Lifting guide | Pick linear bearings + SUJ bearing shaft track |
| Impact hammer triggering | Replacement of various impact hammers according to test specifications |
| Impact hammer modularity | Lift limit, lower limit protection switch and positioning setting |
| Upper and lower limit device | Lift limit, lower limit protection switch and positioning setting |
| Dimension | W*1000*D600*H2400(mm) |
| Weight | 160kg |
| Power supply | AC220V 15A |
Video
