Keywords

[ vertical flammability chamber ]

match 91 products.
VIDEO Quality IEC60331-11:19999 Over Current Fire Testing Equipment For Wires And Cables Resistance To Fire factory

IEC60331-11:19999 Over Current Fire Testing Equipment For Wires And Cables Resistance To Fire

Standards: IEC60331-11:19999, IEC60331-21:1999, IEC60331-23:1999, IEC60331-25:1999
Laboratory: 27m3
Gas Flow Range: 1-10L/min
Burning Time: 0～999.9S/ M/H
Highlight:

flammability test chamber

,

flammability testing labs
VIDEO Quality 16 CFR1633 Mattress Heat Emission Tester With Two Indicators factory

16 CFR1633 Mattress Heat Emission Tester With Two Indicators

Mattress: Burning Test Apparatus
Standard: 16CFR 1633
Gas Analyzer: Servomex
Mass Flowmeter: Range 0-450mg/s, Accuracy ±(0.8%rdg+0.2%F.S.)
Calibrated Gas Flow Control: The Range Is 0-7g/s, The Accuracy Is ±(0.8%rdg+0.2%F.S.)
VIDEO Quality Thermal Conductivity System Tester for Measure the Thermal Conductivity of Thermal Insulation Materials factory

Thermal Conductivity System Tester for Measure the Thermal Conductivity of Thermal Insulation Materials

SKYLINE: Thermal Conductivity System Tester
Specimen Specifications: 300 × 300 (mm)
Thickness: 10 To 40 (mm)
Cold Plate Temperature: 10 ° C ~ 50 ° C
Test Accuracy: ≤ 3%
VIDEO Quality Electric Wire Test Equipment with Automatic Ignition and K Ni/Cr Ni/Al Thermocouple Type factory

Electric Wire Test Equipment with Automatic Ignition and K Ni/Cr Ni/Al Thermocouple Type

Suitable For: Conductor Diameter Greater Than 8mm (section Area Is Greater Than 0.5mm2) Or Less Than 8mm (section Area Less Than 0.5mm2) Of Single Wire And Cable Flammability Evaluation. Suitable For Lighting Equipment, Low-voltage Electrical Appliances, Household Appli
Volume Of Chamber: >0.5m³
Product Category: Flammability Testing Equipment
Thermocouple Type: K (Ni/Cr - Ni/Al)
Automatic Ignition: Yes
VIDEO Quality 600±25mm Cable Flame Test Stopwatch And Thermometer For Accurate Temperature Reading factory

600±25mm Cable Flame Test Stopwatch And Thermometer For Accurate Temperature Reading

Product Name: EC60332/EN50265-1 Single Cable Vertical Flaming Test Machine Cable Flammability Assessment Chamber
Gas Flow Range: 0.1-1L/min(100~1000cm3/min), Can Be Adjusted
Temperature Measurement System: According To GB/T5169.14-2007 And IEC60695-11-03 Standard Requirements, Including Temperature Copper (10g), K Type Thermocouple And Diameter Is 0.5 Mm With Stainless Steel Sheathed, Stopwatch And Thermometer Etc.
Testing Temperature: This Device Is Located In A Stuffiness Room And The Temperature Keeping The 23±10℃ For Testing
Burner: 46~78mm For Height Of Blue Luminous Cone, 148~208mm For Total Height Of Flame, Which According To GB/T5169.14-2007, IEC60695-11-2
VIDEO Quality Interior Color Black Cable Safety Test Equipment with Fully Adjustable Support factory

Interior Color Black Cable Safety Test Equipment with Fully Adjustable Support

Tested Wires Length: 600mm(24 In)
Thermocouple Type: K (Ni/Cr - Ni/Al)
Flame Burn Time: 15 Seconds
Standards Met: UL94, ISO 6722, IEC 60695-11-3, IEC 60695-11-4, UL94HB, V-0,1,2, 94-5VA,B, 94VTM-0,1,2, 94HBF,94HF-1,2
Product Category: Flammability Testing Equipment
VIDEO Quality Interior Color Black Cable Flambility Tester with 15 Seconds Flame Burn Time factory

Interior Color Black Cable Flambility Tester with 15 Seconds Flame Burn Time

Burning Gas Supplied: No, Customer Should Supply
Thermocouple Type: K (Ni/Cr - Ni/Al)
Product Name: Horizontal-Vertical Flammability Test Chamber UL94, ISO 6722
Product Category: Flammability Testing Equipment
Suitable For: Conductor Diameter Greater Than 8mm (section Area Is Greater Than 0.5mm2) Or Less Than 8mm (section Area Less Than 0.5mm2) Of Single Wire And Cable Flammability Evaluation. Suitable For Lighting Equipment, Low-voltage Electrical Appliances, Household Appli
VIDEO Quality 15 Seconds Flame Burn Time Wire Testing Equipment for Commercial Applications factory

15 Seconds Flame Burn Time Wire Testing Equipment for Commercial Applications

Construction Material: Stainless Steel
Suitable For: Conductor Diameter Greater Than 8mm (section Area Is Greater Than 0.5mm2) Or Less Than 8mm (section Area Less Than 0.5mm2) Of Single Wire And Cable Flammability Evaluation. Suitable For Lighting Equipment, Low-voltage Electrical Appliances, Household Appli
Standards Met: UL94, ISO 6722, IEC 60695-11-3, IEC 60695-11-4, UL94HB, V-0,1,2, 94-5VA,B, 94VTM-0,1,2, 94HBF,94HF-1,2
Thermocouple Type: K (Ni/Cr - Ni/Al)
Tested Wires Length: 600mm(24 In)
VIDEO Quality Affordable Electrical Cable Testing Equipment with 600±25mm Specimen Length factory

Affordable Electrical Cable Testing Equipment with 600±25mm Specimen Length

Burning Time: Continuously Setting Between 0.1-999.9S, During The Setting Time Flame Could Continuously Burning The Specimen
Product Category: Flammability Testing Equipment
Specimen Length: 600±25mm
Vertical Burning Chamber: W300 * D450 * H1200mm
Area Flow Range: 220V±10%, 50Hz
VIDEO Quality Cable Fire Resistance Test Equipment UL 2556 / UL 1581 factory

Cable Fire Resistance Test Equipment UL 2556 / UL 1581

SKYLINE: VW-1 Flammability Tester
Standards: UL2556-2013
Burning Time Setting: 0~999S
Air Source: Methane, Air
Test Box Size: 2m(W)×1.2m(D)×1.8m(H)
3 4 5 6 7 8 9 10