Keywords

[ flame test chamber ]

match 100 products.
Quality Cable Electronic Testing Equipment IEC60695 Needle Flame Test Chamber factory

Cable Electronic Testing Equipment IEC60695 Needle Flame Test Chamber

SKYLINE: Needle Flame Test Chamber
Nner Hole Diameter: Inner Hole Diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ,
Burner Angle: 0,°20°, 45° (adjust Flame Height)
Power: 800VA ,220V, 48-60Hz
Chamber: ≥0.5m3
Quality Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber factory

Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber

Standards: IEC60695 -11-5、GB/T5169.5-2008、GB4706.1-2005
Nner Hole Diameter: Nner Hole Diameter Φ 0.5mm ± 0.1mm, Diameter ≤Φ 0.9mm，Length ≥ 35mm
Burner Angle: 0- 45°(any Adjustment)
Power: 800VA ,220V, 48-60Hz
Chamber: ≥0.5m3
VIDEO Quality UL 1685 / UL 2556 Standard Vertical Flame And Smoke Release Test Chamber For Fibre Optic Cables factory

UL 1685 / UL 2556 Standard Vertical Flame And Smoke Release Test Chamber For Fibre Optic Cables

UL: UL Cable Vertical-Tray Flaming Test Room(UL1685)
Inner Size: Height 3353mm, Length 2438mm, Width 2438mm;
Propane Flow Meter: 230 Mm³/s
Air Flow Meter: 1330 Mm³/s
Standard Luminous Flux: 2000lm-3000lm
VIDEO Quality Wire Flame Test Chamber For Electric Cables Under Fire Conditions Circuit Integrity factory

Wire Flame Test Chamber For Electric Cables Under Fire Conditions Circuit Integrity

Wire Flame: Tests For Electric Cables Under Fire Conditions
Material: Stainless Steel
Combustion Chamber: Inner Dimensions: Combustion Chamber: Inner Dimensions: 3M X 3M X 3M Total 27 Cubic Meters.
Flow Meter: Air Flow Meter: 80L/min
Temperature Range: 0~1000°C Can Be Set Arbitrarily.
Quality IEC60695 Flammability Testing Chamber For Electronic Product factory

IEC60695 Flammability Testing Chamber For Electronic Product

Standards: IEC60695 -11-5、GB/T5169.5-2008、GB4706.1-2005
Nner Hole Diameter: Nner Hole Diameter Φ 0.5mm ± 0.1mm, Diameter ≤Φ 0.9mm，Length ≥ 35mm
Burner Angle: 0- 45°(any Adjustment)
Power: 800VA ,220V, 48-60Hz
Chamber: ≥0.5m3
VIDEO Quality Fire Testing Equipment / Vertical Flame Test Chamber factory

Fire Testing Equipment / Vertical Flame Test Chamber

Standards: IEC60332-1-1:2004,
Burning Chamber: 300x1200x450mm(W*H*D)
Specimen Length: 600±25mm
Gas Flow Range: 0.1-1L/min
Highlight:

flammability test chamber

,

flammability testing labs
VIDEO Quality 600±25mm Cable Flame Test Stopwatch And Thermometer For Accurate Temperature Reading factory

600±25mm Cable Flame Test Stopwatch And Thermometer For Accurate Temperature Reading

Product Name: EC60332/EN50265-1 Single Cable Vertical Flaming Test Machine Cable Flammability Assessment Chamber
Gas Flow Range: 0.1-1L/min(100~1000cm3/min), Can Be Adjusted
Temperature Measurement System: According To GB/T5169.14-2007 And IEC60695-11-03 Standard Requirements, Including Temperature Copper (10g), K Type Thermocouple And Diameter Is 0.5 Mm With Stainless Steel Sheathed, Stopwatch And Thermometer Etc.
Testing Temperature: This Device Is Located In A Stuffiness Room And The Temperature Keeping The 23±10℃ For Testing
Burner: 46~78mm For Height Of Blue Luminous Cone, 148~208mm For Total Height Of Flame, Which According To GB/T5169.14-2007, IEC60695-11-2
VIDEO Quality IEC 60332-1-1 1 KW Single Insulated Wire And Cable Vertical Flame Test Equipment factory

IEC 60332-1-1 1 KW Single Insulated Wire And Cable Vertical Flame Test Equipment

SKYLINE: Wire And Cable Vertical Flame Test Equipment
Vertical Burning Chamber: 60x45x156cm
Length Of Specimen: 600±25mm
Burner: Inner Diameter: Φ9.5mm ± 0.5mm
Flame Height: 20mm ± 2mm To 190mm ± 1mm Adjustable
VIDEO Quality Horizontal Vertical Flammability Test Chamber UL94, ISO 6722 factory

Horizontal Vertical Flammability Test Chamber UL94, ISO 6722

Tested Wires Length:600mm(24 In): Sample Clamping Angle:45 Degree
Burning Gas Using High Purity Propane Gas: Liquefied Petroleum Gas
Automatic Ignition: Flame Burn The Sample Continue 15 Seconds And Be Off Automatically
Burning Gas Is Not Supplied With The Tester: It Should Be Supplied By Customer
Meet Standards: UL94, ISO 6722
VIDEO Quality IEC60695 Laboratory Needle Flame Tester For Insulation Material Fire Testing factory

IEC60695 Laboratory Needle Flame Tester For Insulation Material Fire Testing

Standards: IEC60695 -11-5、GB/T5169.5-2008、GB4706.1-2005
Nner Hole Diameter: Nner Hole Diameter Φ 0.5mm ± 0.1mm, Diameter ≤Φ 0.9mm，Length ≥ 35mm
Burner Angle: 0- 45°(any Adjustment)
Power: 800VA ,220V, 48-60Hz
Chamber: ≥0.5m3
1 2 3 4 5 6 7 8