Quality COD Ammonia Nitrogen Total Phosphorus Total Nitrogen Rapid Tester SL-OA67 factory

COD Ammonia Nitrogen Total Phosphorus Total Nitrogen Rapid Tester SL-OA67

Measuring Range: Chemical Oxygen Demand (COD): 5-10000mg/L Segmented Measurement
Ammonia Nitrogen: ≤3%; Total Phosphorus: ≤3%; Total Nitrogen: ≤±%
Total Phosphorus: 0.02-20mg/L
Total Nitrogen: ≤±5% (FS)
Measurement Error: Chemical Oxygen Demand (COD): 5-200mg/L; Error ≤ 5mg/L 100-10000mg/L; Relative Error≤±5%
Quality SL-OA66 Infrared Photometric Oil Meter High Precision Analytical factory

SL-OA66 Infrared Photometric Oil Meter High Precision Analytical

Wavenumber Scanning Range: 3400cm-1～2400cm-1 Wavenumber
Repeatability: ±1cm-1 Wavenumber
Accuracy: ±1cm-1
Spectrum Resolution: 1 Cm-1
Absorbance Linear Range: 0.0000～1.9999
Quality Microcoulomb Sulfur Chloride Analyzer easy to operate factory

Microcoulomb Sulfur Chloride Analyzer easy to operate

Bias Voltage Range: 0 ~ 500mv
Measuring Range: 0.1～10000 Ng/μl
Temperature Control Range: Room Temperature ~ 1000 ℃
Temperature Control Accuracy: ±1°C
Measurement Accuracy: Sample Concentration (ng/μl) 0.2 RSD(%)35 Sample Concentration (ng/μl) 1.0 RSD (%)10 Sample Concentration (ng/μl) 100 RSD(%)5 Sample Concentration (ng/μl)1000 RSD(%)2
Quality Portable Particle Size Counter Easy To Use SL-OA63 factory

Portable Particle Size Counter Easy To Use SL-OA63

Microscope: 100 Times
Detection Of Particles: 5μm ~ 150μm
Detection Level: NAS Level 00-12, ISO Level 1-24
Filter Membrane: 1.2μm, 5μm
Accuracy: ±0.5 Pollution Level
Quality Oil Gas Separation Corrosive Sulfur Tester Automatic Insulating factory

Oil Gas Separation Corrosive Sulfur Tester Automatic Insulating

Temperature Control Range: 35-200°C
Temperature Control Accuracy: ±0.1°C
Temperature Control Uniformity: ±1℃
Timing Range: 0.0-999.9 Hours
Alarm Function: After The Timing Is Over, An Automatic Alarm Prompts
Quality Fully Automatic Insulating Oil Gas Separation Tester 1200rpm factory

Fully Automatic Insulating Oil Gas Separation Tester 1200rpm

Constant Temperature: 80℃
Accuracy: ±0.2
Resolution: 1S
Test Voltage: 10.00KV
Time Measurement: 5 MIN; 10 MIN; 50MIN; 60MIN; 120MIN
Quality ASTM D2699 Octane And Cetane Value Tester Portable factory

ASTM D2699 Octane And Cetane Value Tester Portable

Octane Number Measurement Range: 40-120
Allowable Measurement Error Of Octane Number Meter: 0.5
Floating Range Of Octane Number Meter Measurement Results: ± 0.2
Allowable Measurement Error Of Cetane Number Meter: ± 1
Floating Range Of Cetane Number Meter Measurement Results: ± 0.5
Quality Density Tester ASTM D1298 Petroleum Product Testing Equipment factory

Density Tester ASTM D1298 Petroleum Product Testing Equipment

Power: 500W
Overall Dimension: 680mm × 420mm × 345mm
Temperature Control Range: 20~100 ℃ Can Be Set At Will (optional Cooler). The Temperature Control Range Can Reach Below 20 ℃ By Configuring Cold Source
Temperature Control Accuracy: ± 0.1 ℃
Heating Power: 1000W
Quality Electric Automatic Water Soluble Acid Analyzer SL-OA56 factory

Electric Automatic Water Soluble Acid Analyzer SL-OA56

Test Range: PH 3.8~7.0
Measurement Error: ≤± 0.05 PH
Repeatability: ≤ 0.05 PH
Applicable Temperature: 5 ℃～ 40 ℃
Applicable Humidity: ≤ 85%
Quality Lubricating Oils Foaming Characteristics Tester Foaming ASTM D892 factory

Lubricating Oils Foaming Characteristics Tester Foaming ASTM D892

Name: Lube Oil Analysis Tester
Standard: ASTM D892
Temperature Of Thermostatic Bath: 24 ℃ (optional Throw In Cooler) 93.5 ℃
Emperature Control Accuracy: ± 0.5 ℃
Heater Power: 2500W (93.5 ℃ Bathtub) 800W (24 ℃ Bathtub)
1 2 3 4 5 6 7 8