Quality ASTM D92 Cleveland Open Cup Flash Point Tester factory

ASTM D92 Cleveland Open Cup Flash Point Tester

SKYLINE: Cleveland Open Cup Flash Point Tester
Standard: ASTM D92
Working Power Supply: AC (220 ± 10%) V, 50Hz
Temperature Measurement Range: Room Temperature~400 ℃; Temperature Display Unit 0.1 ℃
Repeatability: ≤ 8 ℃ (flash Point And Fire Point)
Quality 0-80kv ASTM D877 ASTM D1816 Transformer Oil Breakdown Voltage Tester factory

0-80kv ASTM D877 ASTM D1816 Transformer Oil Breakdown Voltage Tester

Booster Capacity: 1.5kVA
Boost Speed: 0.5kV/s-5.0kV/s (in 0.5 Increments) Ten Steps Of Your Choice Error 0.2kV/s
Output Voltage: 0 ~ 80 KV (optional)
Voltage Accuracy: (2% Of Reading + 2 Words)
Power Distortion Rate: ＜1%
Quality Noack Method Lubricating Oils Evaporation Loss Analyzer ASTM D5800 Standard factory

Noack Method Lubricating Oils Evaporation Loss Analyzer ASTM D5800 Standard

Applicable Standard: SH/T0059;ASTM D5800
Temperature Control Mode: Digital Display PID Temperature Control
Temperature Control Range: Room Temperature ~ 250 ± 0.1 ℃, Precision 0.01 ℃
Heating Mode: Metal Bath Heating
Pressure Regulation: High Precision Needle Valve
Quality Lubricating Oil Evaporating Loss Tester ASTM D5800 Use Noack Method factory

Lubricating Oil Evaporating Loss Tester ASTM D5800 Use Noack Method

Applicable Standard: SH/T0059;ASTM D5800
Temperature Setting: Resolution Accuracy ±0.1℃ Temperature Accuracy ± 0.5℃
Temperature Eating Unit: Environmental Protection Light Heating Unit
Vacuum Control: Vacuum Pump And Manometer Air Filter
Pressure Range: 0～25mm H20
Quality ASTM D217 Lubricating Grease Cone Penetration Meter 0～60s Automatic Timing factory

ASTM D217 Lubricating Grease Cone Penetration Meter 0～60s Automatic Timing

Power Source:: AC 220V±10% 50Hz
Timer: 0～60s Automatic Timing
Measurement Accuracy:: 0.01mm
Standard Slide Bar: 47.5±0.05g
Standard Cone: 2.5±0.05g
Quality ASTM D1743 Grease Corrosion Resistance Tester 60W Power factory

ASTM D1743 Grease Corrosion Resistance Tester 60W Power

Tech Indicator: Description
Power: AC220V±10% 50Hz (Can Be Changed To Your Country Request)
Motor Speed: 1450r/min±50r/min
Motor Power: 60W
Bearing Body: LM11949
Quality Transformer Dielectric Loss And Resistivity Tester For Insulating Oil factory

Transformer Dielectric Loss And Resistivity Tester For Insulating Oil

Condition Of Use: -5℃∽40℃ RH＜80%
Power Source: AC 110V±10% Without Frequency Limit
AC High Voltage Output: 400V∽2200V ±2% Every 100V 50VA
DC High Voltage Output: 200V∽600V ±2%
Temperature Control Induction Stove: Maximal Power 500W
Quality Fourier Transform Infrared Spectrometer SL-OA76 factory

Fourier Transform Infrared Spectrometer SL-OA76

Spectral Range: 7800-350 Cm-1
Detector: DTGS Detector
Resolution: Better Than 1.0 Cm-1, Continuously Adjustable.
100% τ Line Tilt Range: Better Than 0.5τ% (2200 ~ 1900cm-1)
Signal To Noise Ratio: 30000: 1 (P-P Value, 4cm-1, One Minute Scan)
Quality Digital Portable Electronic Densimeter With ASTM D4052 factory

Digital Portable Electronic Densimeter With ASTM D4052

Weight: 10kg
Stirring Capacity: 150-6000ml
Size (mm): 200*315*600
Rotational Speed (rpm): 50~3000
Maximum Stirring Viscosity: 80000mPas
Quality Electronic Digital Hydrometer Density Meter Portable With ASTM D4052 factory

Electronic Digital Hydrometer Density Meter Portable With ASTM D4052

Operating Mode: Button
Weighing Range (g): 0.001-120
Density Accuracy (g/cm3): 0.0001
Test Time: 5s
Setting: Temperature Setting, Measuring Medium Density Setting, Waterproof Handling Medium Setting
1 2 3 4 5 6 7 8