- Home
-
PCB Fab
Lab Testing Equipment Flammability Testing Equipment Fire Testing Equipment Test Equipment Mattress Testing Machine Environmental Test Chamber Toys Testing Equipment Oil Analysis Testing Equipment Footwear Testing Equipment Furniture Testing Equipment Tensile Strength Testing Machine Textile Testing Equipment Leather Testing Equipment Temperature And Humidity Test Chamber Electronic Testing Equipment Building Materials Flammability Tester Cosmetics Testing Equipment
-
Assembly
-
Capabilities
- About Us
- contact
- Quote
Molten Metal Splashes Impact Test Apparatus
| Standard: | AQ 6103 ,ISO 9150:1988 , CSN EN 348:1992 ,GB 8965.2:2009, GB/T 17599:1998 |
|---|---|
| Motor Speed: | Can Be Adjust |
| Dimension: | 700mm (W) X 850mm (H) X 500mm (D) |
| Weight: | 42kg |
| Installation Requirements: | Electrical Requirements: 220V, 50HZ, 5A |
IEC60331-11 Wire & Cable Resistance To Fire Mechanical Shock Tester / Flammability Test Chamber
| Standards: | IEC60331-11, IEC60331-21, IEC 60331-1etc. |
|---|---|
| Size: | W25*D25* L1000mm |
| Shock Speed: | 30±2s/T |
| Shock Bar Length: | 600mm |
| Highlight: | flammability test chamber,flammability test apparatus |
IEC61034 Wires & Cables Smoke Density Tester with Steel Structure Combustion Chamber
| Standards: | IEC61034-1997, GA306.1-2007 Etc |
|---|---|
| Burning Room Size: | W3000*D3000*H3000mm (27m3) |
| Material: | Stainless Steel |
| Measurement Range: | 0-100% |
| Sensor: | Photocell, Load Resistance≤100Ω |
Wire And Cable Heat Release Test Device
| SKYLINE: | Wire And Cable Heat Release Test Device |
|---|---|
| Standards: | DIN EN 50399:2017,EN 50399 |
| Electrical: | 110V AC 60Hz / 230V AC 50Hz, 5A |
| Ambient Temperature: | Operating 10°C To 35°C |
| Highlight: | flammability test apparatus,flammability testing labs |
Horizontal Flammability Tester Chamber Safety for Electrical Wires , Cables and Flexible Cords
| SKYLINE: | UL1581 Flammability Test Chamber |
|---|---|
| Testing Chamber: | L2200*D1300*H1650mm |
| Capacity: | >4.0 M3 |
| Bunsen Burner: | Conforms To ASTM D5025 |
| Gas: | Methane Which At 98% Minimum Purity, |
1000V Fire Testing Equipment Wire & Cable Resistance To Fire With Water IEC60331-11
| Standards: | IEC60331-11, IEC60331-21, IEC 60331-1etc. |
|---|---|
| Testing Power: | AC0-1000V |
| Testing Temperature: | 650±40℃ |
| Specimen Size: | Length About 400mm |
| Highlight: | flammability test chamber,flammability testing labs |
Fire Testing Equipment Wire And Cable Vertical Horizontal Burning Test Machine
| SKYLINE: | Wire And Cable Vertical Horizontal Burning Test Machine |
|---|---|
| Standards: | UL1581.UL13.UL444.UL1655 VW-1 |
| Vertical Combustion Chamber Internal Size: | 305*355*610mm |
| Nozzle Angle: | 20 Degrees |
| Highlight: | flammability test chamber,flammability test apparatus |
IEC 60331-21 Fire Testing Equipment Wire Flame Small Lab Oven Without Combustion Chamber
| IEC 60331-21: | Wire Flame Chamber |
|---|---|
| Air Flow Meter:: | 80L/min |
| Propane Flow Meter: | 5L/min |
| Temperature Range: | 0~1000°C Can Be Set Arbitrarily. |
| Test Transformer: | 3000VA Three |
SKYLINE D1.5m Fire Testing Equipment 30-50KPa Vertical Furnace
| SKYLINE: | Vertical Furnace |
|---|---|
| Furnace Dimension: | H4.0×W4.0×D1.5m |
| Working Temperatur: | ≤1200℃ |
| Fuel Calorific Value: | 25000 Kcal/m3 |
| Fuel Preasur: | 30-50KPa; |
IEC60331-11:19999 Over Current Fire Testing Equipment For Wires And Cables Resistance To Fire
| Standards: | IEC60331-11:19999, IEC60331-21:1999, IEC60331-23:1999, IEC60331-25:1999 |
|---|---|
| Laboratory: | 27m3 |
| Gas Flow Range: | 1-10L/min |
| Burning Time: | 0~999.9S/ M/H |
| Highlight: | flammability test chamber,flammability testing labs |